Built around the products service professionals need. Clear refrigerant choices, without the guesswork.

Check the equipment nameplate first, then confirm the information against the manufacturer's installation or service literature. The refrigerant designation should be clearly identified, for example R410A, R32, R454B, R404A, R407C, R22 or R134A.

No. R410A, R32 and R454B differ in operating characteristics, safety classification and equipment requirements. R32 and R454B are A2L refrigerants and are intended for systems designed and approved for their use.

Only use a replacement or retrofit procedure specifically permitted by the equipment manufacturer and applicable service requirements.

These refrigerants may all be used in air-conditioning or heat-pump applications, but each is a distinct product and they should not be treated as interchangeable.

The equipment label and manufacturer's documentation should always be the final reference.

Different refrigerants generally should not be mixed. Mixing can alter pressure-temperature behavior, reduce performance and complicate future recovery, identification and service.

The advertised pound rating normally describes the stated net refrigerant contents, not the total shipping weight of the filled cylinder.

The cylinder shell, valve, packaging and shipping materials add additional weight. Always use the cylinder label as the final reference for net contents.

Not necessarily. Required charge varies by equipment capacity, design, line-set length, installation configuration and manufacturer specifications.

The correct procedure depends on the equipment and manufacturer's service instructions. Refrigerant weight is often important, while pressure, temperature, subcooling and superheat measurements may also be required.

Follow the approved procedure for the specific equipment rather than one universal rule.

Each refrigerant has its own pressure-temperature relationship. Expected pressure changes with refrigerant type, ambient conditions, system load and operating temperature.

The exact setup depends on the service task, but commonly used equipment includes:

• Compatible manifold gauge set
• Properly rated hoses and fittings
• Refrigerant charging scale
• Vacuum pump and micron gauge
• Leak-detection equipment
• Recovery machine and approved recovery cylinder
• Temperature measurement tools

A2L service may require tools and procedures specifically intended for mildly flammable refrigerants.

Low refrigerant can indicate a leak or another system issue. Simply adding refrigerant may not correct the underlying problem.

A qualified technician should evaluate the system, repair leaks where required, confirm system integrity and recharge according to the manufacturer's procedure.

Follow the cylinder label and manufacturer storage instructions. Cylinders should generally be secured in an appropriate, ventilated area and protected from excessive heat, impact and unauthorized handling.

A2L refrigerants may be subject to additional storage and handling requirements.

Existing equipment originally designed for R22 may still require R22 or an approved retrofit solution during service. The correct approach depends on the equipment, manufacturer guidance, service procedure and current regulatory requirements.

Do not select another refrigerant merely because its pressure characteristics appear similar.

A2L is a safety classification used for refrigerants with lower flammability characteristics than more highly flammable classes. Equipment intended for these refrigerants incorporates related design and service requirements.

Refrigerants used in stationary air-conditioning and refrigeration systems may be subject to U.S. EPA sales requirements. Section 608 technician certification or other qualifying purchaser documentation may be required depending on the transaction and intended use.

Purchasers are responsible for complying with applicable federal, state and local rules covering purchase, handling, recovery and service work.