R22 — Professional refrigerant supply for permitted servicing of compatible legacy equipment.
R22 (HCFC-22) is intended only for equipment originally designed and identified for this refrigerant, subject to applicable legal and supply restrictions.
ClassificationA1 — lower toxicity / no flame propagation
PackagingFactory-sealed service cylinder
Intended userProfessional / qualified service use
R22 is a legacy HCFC refrigerant. In the United States, production and import of newly manufactured R22 for servicing ended in 2020; existing inventories and reclaimed material remain subject to applicable rules.
Service & Handling
Match the refrigerant, tools and procedure to the equipment.
Refrigeration and HVAC systems are designed around specific pressure, lubricant, material and safety requirements. Verify the system before opening or connecting the cylinder.
R22 is an ozone-depleting HCFC and is subject to significant regulatory restrictions.
Do not confuse R22 with products marketed as R22a; they are not the same refrigerant.
Confirm legal eligibility, refrigerant source and equipment requirements before purchase or service.
Cylinder & Storage
What is supplied and what to check before use
Package contents
One factory-sealed R22 refrigerant cylinder
The cylinder contains the stated net refrigerant weight. Inspect the cylinder condition and product label when it arrives and before service.
Model: R22
Net contents: 30 lb / 13.6 kg
Factory-sealed service cylinder format
Before connecting
Verify compatibility, safety information and local requirements.
Store and secure the cylinder in accordance with its label, safety data sheet and applicable transport or storage rules.
Read the cylinder label and SDS before handling.
Use only service equipment approved for this refrigerant.
Recovery, recycling and disposal must follow applicable regulations.
This page is a general purchasing reference. It does not replace the equipment manufacturer's instructions, the refrigerant safety data sheet, technician training, certification requirements, or applicable federal, state and local regulations.
REFRIGERANT KNOWLEDGE CENTER
Practical answers for refrigerant selection, service and handling.
Review common refrigerant questions before ordering or servicing equipment.
This guide covers identification, charging, cylinder capacity, A2L products,
compatible service tools and other routine HVAC considerations.
System IdentificationCharging & RecoveryRefrigerant CylindersA2L SafetyHVAC Service Tools
01How can I verify the refrigerant required by my HVAC system?
Check the equipment nameplate first, then confirm the information against the
manufacturer's installation or service literature. The refrigerant designation
should be clearly identified, for example R410A, R32, R454B, R404A, R407C, R22 or R134A.
Ordering reminder: Match the refrigerant to the exact designation
approved for the equipment rather than relying on equipment appearance alone.
02Are R32 or R454B direct substitutes for R410A?
No. R410A, R32 and R454B differ in operating characteristics, safety classification
and equipment requirements. R32 and R454B are A2L refrigerants and are intended for
systems designed and approved for their use.
Only use a replacement or retrofit procedure specifically permitted by the equipment
manufacturer and applicable service requirements.
03How do R410A, R32 and R454B differ?
These refrigerants may all be used in air-conditioning or heat-pump applications,
but each is a distinct product and they should not be treated as interchangeable.
R410ACommon in many installed residential and commercial HVAC systems.
R32Used in newer equipment specifically designed and labeled for R32.
R454BUsed in newer systems engineered and approved for R454B service.
The equipment label and manufacturer's documentation should always be the final reference.
04Should different refrigerants ever be mixed in one system?
Different refrigerants generally should not be mixed. Mixing can alter
pressure-temperature behavior, reduce performance and complicate future recovery,
identification and service.
Do not substitute another refrigerant simply because the specified product is unavailable.
05What do 20 lb, 25 lb and 30 lb cylinder sizes indicate?
The advertised pound rating normally describes the stated net refrigerant contents,
not the total shipping weight of the filled cylinder.
The cylinder shell, valve, packaging and shipping materials add additional weight.
Always use the cylinder label as the final reference for net contents.
06Does one refrigerant cylinder equal one full equipment charge?
Not necessarily. Required charge varies by equipment capacity, design, line-set length,
installation configuration and manufacturer specifications.
Before purchasing: Confirm the system's required charge instead of
assuming a cylinder services a fixed number of units.
07Should a system be charged by weight or by pressure?
The correct procedure depends on the equipment and manufacturer's service instructions.
Refrigerant weight is often important, while pressure, temperature, subcooling and
superheat measurements may also be required.
Follow the approved procedure for the specific equipment rather than one universal rule.
08Why are operating pressures different from one refrigerant to another?
Each refrigerant has its own pressure-temperature relationship. Expected pressure changes
with refrigerant type, ambient conditions, system load and operating temperature.
Service gauges, hoses and fittings should be suitable for both the refrigerant and the
expected working pressure.
09Which tools are commonly used for refrigerant service?
The exact setup depends on the service task, but commonly used equipment includes:
Compatible manifold gauge set
Properly rated hoses and fittings
Refrigerant charging scale
Vacuum pump and micron gauge
Leak-detection equipment
Recovery machine and approved recovery cylinder
Temperature measurement tools
A2L service may require tools and procedures specifically intended for mildly flammable refrigerants.
10What should be checked before refrigerant is added to a low system?
Low refrigerant can indicate a leak or another system issue. Simply adding refrigerant
may not correct the underlying problem.
A qualified technician should evaluate the system, repair leaks where required, confirm
system integrity and recharge according to the manufacturer's procedure.
11What is the proper way to store refrigerant cylinders?
Follow the cylinder label and manufacturer storage instructions. Cylinders should generally
be secured in an appropriate, ventilated area and protected from excessive heat, impact
and unauthorized handling.
A2L refrigerants may be subject to additional storage and handling requirements.
12Can older R22 equipment still be serviced with R22?
Existing equipment originally designed for R22 may still require R22 or an approved
retrofit solution during service. The correct approach depends on the equipment,
manufacturer guidance, service procedure and current regulatory requirements.
Do not select another refrigerant merely because its pressure characteristics appear similar.
13What does the A2L classification mean for refrigerants such as R32 and R454B?
A2L is a safety classification used for refrigerants with lower flammability characteristics
than more highly flammable classes. Equipment intended for these refrigerants incorporates
related design and service requirements.
Never charge an A2L refrigerant into equipment that was not designed and approved for it.
14Can refrigerant purchases require technician certification or documentation?
Refrigerants used in stationary air-conditioning and refrigeration systems may be subject
to U.S. EPA sales requirements. Section 608 technician certification or other qualifying
purchaser documentation may be required depending on the transaction and intended use.
Purchasers are responsible for complying with applicable federal, state and local rules
covering purchase, handling, recovery and service work.
